GE 869 Instruction Manual page 537

CHAPTER 4: SETPOINTS
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
5. Read the "Test Status" register. The values of 0, 1, 2 and 3 are for None, Testing, Passed
and Failed, respectively.
6. Read the "Tests Passed" count and "Tests Failed" count registers to determine the
number of tests that passed and failed respectively.
Table 4-41: Modbus Addresses
Data Item Data type
Number of Tests Setpoint, 16 bit value
Test Start (Command) Setpoint, 16 bit enumeration
Test Status Actual Value, 16 bit enumeration
Tests to Run Actual Value, 16 bits
Tests Passed (Count) Actual Value, 16 bits
Tests Failed (Count) Actual Value, 16 bits
Ethernet Port 4 Ethernet Port 5
Modbus Address Modbus Address
0XF212 0XF218
0XF213 0XF219
0XF214 0XF21A
0xF215 0XF21B
0xF216 0XF21C
0xF217 0XF21D
TESTING
4–405