3) Make sure that ball (1) makes creaking noise when
shaking the reverse clutch piston. (i.e., check that
ball is free.)
4) Check that there is no leakage by applying low-
pressure air onto ball.
5) Check that outer surface of reverse clutch with
bearing is not worn or burnt. If necessary, replace.
Counter Drive Gear Components
1. Counter drive gear
2. Angular ball bearing
3. Locknut
: After tightening nut so as starting / rotational torque of
counter drive gear to be in specified value, stake nut securely.
: Apply automatic transaxle fluid.
: Do not reuse.
Counter Drive Gear Disassembly and
Reassembly
Disassembly
1) Clamp special tool in vise (1) and place counter drive
gear onto the special tool.
Special tool
(A): 09927-76040
I2RH01510197-01
2) Unstake lock section of lock nut and remove lock nut
using special tool.
Special tool
(A): 09927-26010
I2RH01510198-01
S3RH0B5106048
I2RH01510199-01
Automatic Transmission/Transaxle:
5A-111
S3RH0B5106049
I2RH01510200-01
I2RH01510201-01