Removable Parts Hierarchy - Toshiba TDP-MT8 Service Manual

Removable Parts Hierarchy

The flow chart below shows what parts must be removed to access each FRU in the projector. The parts
on the first level (the lamp door, for example) are accessible without removing any other parts. The more
levels down a part is, the more parts you need to remove.
Start
Outer handle
Rear bezel
Leveling foot
Rear bezel foot
Focus ring
Rubber foot
Lamp door
TDP-MT8 Service Guide
Front IR lens Inner handle
Top case Front IR receiver
Security plate
Keypad
Rear IR lens Fan bracket
Zoom ring Fan
Right IR receiver
Left IR receiver
Lamp module
Controller ECA
Rear IR receiver
Elevator button
Elevator shaft
Lamp blower
contact ECA
Front vent
Key set Keypad reflector
Fan mount
Side IR lens
Side IR lens
I/O shield
Power supply/
controller ECA cable
Lamp control cable
Power supply/
ballast cable
Lamp connector
retainer
Ballast Leveling foot shaft
Ballast/power
Chassis
supply insulator
Power supply Safety switch
Optical engine Elevator spring
Optical engine
Elevator actuator
mounting bracket
Bottom case
6