Panasonic CF-07 Series Reference Manual page 4

Standby/Hibernation Functions
Precautions
Before entering the standby or hibernation mode
Save all data.
When a file in an external device such as a CD drive, external hard disk, or ATA
card is opened, close the file.
Do not enter either the standby or hibernation mode under the following condi-
tions. You may corrupt your data or file, the standby or hibernation function may
not work, or the computer (or peripherals) may fail to work properly.
• When the hard disk drive indicator (
drive is on.
• When playing/recording audio files and displaying images (such as MPEG files).
• When using the communications software and the network function.
• When using LAN port (cards), SCSI cards and modem port (cards) etc. (If these
cards fail to work properly, restart the computer.)
When entering the standby or hibernation mode*
Avoid the following:
• Touching the external keyboard, touchscreen or power switch.
• Connecting or disconnecting the AC adaptor.
* Standby mode: until the power indicator blinks green
Hibernation mode: until the power indicator goes off
When [PC in standby] is displayed on the wireless display, select [OK]. The wire-
less display will power off.
In standby or hibernation mode
Do not insert or remove peripherals; abnormal operation may result.
In standby mode, power is consumed. If PC Cards are inserted, more of that
power is consumed. When all power has been consumed, all data saved at standby
is lost since it is retained in memory. We therefore recommend plugging in the AC
adaptor when using the standby function.
) ( page 2) or access lamp on the CD
4