G:\Work\SONY\TV\847342S DMX-WL1T\0724\387708311DMX-
WL1\050OTH.fm
010COV.book Page 18 Thursday, July 24, 2008 2:04 PM
Installing the Receiver Unit on the Wall
The receiver unit can be installed on a wall with
the supplied Wall-Mount bracket. In this case,
consult an experienced radio/TV technician for
installation.
For installation, use appropriate screws for the
wall.
1
Install the supplied Wall-Mount bracket on
the wall.
Less
than
2.5 mm
2
Align the slider on the bottom of the receiver
unit with the groove of the Wall-Mount
bracket.
3
Slide down the receiver unit.
18
Screw
(not supplied)
masterpage:Left
DMX-WL1
3-877-083-11(1)