Miele HR1936 Operating Instructions Manual page 42

Problem solving guide
Problem
Rotary control is
flashing
The griddle plate does
not get hot.
42
Cause and remedy
The gas hob is equipped with an ignition safety
device. The gas flame is extinguished and a
subsequent attempt at re-ignition was unsuccessful
(see "Operation - Ignition safety").
 Turn the rotary control to the  (Off) position.
The electronic ignition for the gas hob carries out a
self-test as soon as the first burner is switched on or
the last burner is switched off. The self-test was
interrupted (see "Operation - Electronic ignition self-
test ").
 Turn the rotary control to the  (Off) position.
The gas hob is equipped with an ignition safety
device. The gas flame is extinguished and a
subsequent attempt at re-ignition was unsuccessful
(see "Operation - Ignition safety").
The rotary control light ring does not flash when re-
ignition is unsuccessful.
 Turn the rotary control to the  (Off) position.
The electronic ignition for the gas hob carries out a
self-test as soon as the first burner is switched on or
the last burner is switched off. The self-test was
interrupted (see "Operation - Electronic ignition self-
test ").
The light ring on the rotary control does not flash if
the self-test was interrupted.
 Turn the rotary control to the  (Off) position.