1. Manuals
  2. Brands
  3. ABB Manuals
  4. Protection Device
  5. Relion REQ650
  6. Product manual

ABB REQ650 Product Manual

Breaker protection req650 ansi
Hide thumbs Also See for REQ650:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Commissioning Manual, Product Manual
®
Relion
650 series
Breaker protection REQ650 ANSI
Product Guide

Advertisement

Table of Contents
loading

Related Manuals for ABB REQ650

Summary of Contents for ABB REQ650

  • Page 1 ® Relion 650 series Breaker protection REQ650 ANSI Product Guide...

  • Page 2: Table Of Contents

    18. Ordering..............84 Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB AB. ABB AB assumes no responsibility for any errors that may appear in this document. © Copyright 2011 ABB Inc..

  • Page 3: Series Overview

    Revision: - suitable. The advanced automatic reclosing, 1. 650 series overview synchronizing, synchrocheck and energizing check functions of REQ650 provides an optimized stand alone product. This IED also The 650 series IEDs provide optimum 'off-the- enables well-structured and reliable protection shelf', ready-to-use solutions.
  • Page 4 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 132 kV Bus REQ650-A01A – Single Busbar Single breaker 10AI (4I+1I+5U) Three phase variant 132kV/110V Meter. V MMXU 289G 0->1 1->0 SYNC BKR1 SMB RREC SMP PTRC SES RSYN >...
  • Page 5 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 132 kV Bus REQ650-B11A – Double Busbar Single breaker 10AI (4I+1I+5U) Single phase variant 132kV/ 110V 132kV/ 110V Meter. V MMXU Meter. V MMXU 289G 0->1 1->0...
  • Page 6 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 132 kV Bus REQ650-B11A – Double Busbar Single breaker 10AI (4I+1I+5U) Single phase variant 132kV/ 110V 132kV/ 110V Meter. V MMXU Meter. V MMXU 289G 0->1 1->0...

  • Page 7: Available Functions

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 3. Available functions...
  • Page 8 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Back-up protection functions IEC 61850/ ANSI Function description Breaker Function block name Current protection PHPIOC Instantaneous phase overcurrent protection SPTPIOC Instantaneous phase overcurrent protection OC4PTOC 51/67...
  • Page 9 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 IEC 61850/ ANSI Function description Breaker Function block name Voltage protection UV2PTUV Two step undervoltage protection OV2PTOV Two step overvoltage protection ROV2PTOV 59N Two step residual overvoltage protection...
  • Page 10 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Control and monitoring functions IEC 61850/ ANSI Function description Breaker Function block name Control SESRSYN Synchrocheck, energizing check, and synchronizing SMBRREC Autorecloser STBRREC Autorecloser QCBAY Bay control...
  • Page 11 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 IEC 61850/ ANSI Function description Breaker Function block name I103POSCMD IED commands with position and select for IEC60870-5-103 Secondary system supervision CCSRDIF Current circuit supervision SDDRFUF...
  • Page 12 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 IEC 61850/ ANSI Function description Breaker Function block name FXDSIGN Fixed signal function block B16I Boolean 16 to Integer conversion B16IFCVI Boolean 16 to Integer conversion with...
  • Page 13 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 IEC 61850/ ANSI Function description Breaker Function block name MVEXP Measured value expander block SPVNZBAT Station battery supervision SSIMG Insulation gas monitoring function SSIML Insulation liquid monitoring function...
  • Page 14 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Designed to communicate IEC 61850/ ANSI Function description Breaker Function block name Station communication IEC 61850 communication protocol, LAN1 DNP3.0 for TCP/IP communication protocol, LAN1 IEC61870-5-103...
  • Page 15 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Basic IED functions IEC 61850/ Function description Function block name Basic functions included in all products INTERRSIG Self supervision with internal event list SELFSUPEVLST Self supervision with internal event list...

  • Page 16: Current Protection

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 directional or non-directional independently for 4. Current protection each of the steps. Instantaneous residual overcurrent Instantaneous phase overcurrent protection EFPIOC (50N) protection PHPIOC (50) The Instantaneous residual overcurrent...
  • Page 17 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 is significantly smaller than the short circuit Breaker failure protection (CCRBRF, 50BF) currents. In addition to this, the magnitude of current criteria can be fulfilled by one or two...
  • Page 18 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 on the disconnected part of the line. The Directional over/underpower primary line distance protection will thus not protection GOPPDOP/GUPPDUP be able to operate and must be blocked.

  • Page 19: Voltage Protection

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 5. Voltage protection Loss of voltage check LOVPTUV (27) Loss of voltage check (LOVPTUV, 27) is Two step undervoltage protection suitable for use in networks with an automatic UV2PTUV (27) system restoration function.

  • Page 20: Secondary System Supervision

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Rate-of-change frequency protection Fuse failure supervision SDDRFUF SAPFRC (81) The aim of the fuse failure supervision function Rate-of-change frequency protection function (SDDRFUF) is to block voltage measuring...

  • Page 21: Control

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 be connected. It is used for slip frequencies Breaker close/trip circuit monitoring that are larger than those for synchronism TCSSCBR check and lower than a set maximum level for the synchronizing function.

  • Page 22: Logic

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 function blocks LOCREM and LOCREMCTRL to single point commands, designed to bring in the Bay control (QCBAY) function block. A commands from REMOTE (SCADA) to those...
  • Page 23 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 • RSMEMORY function block is a flip-flop that Trip matrix logic TMAGGIO can reset or set an output from two inputs respectively. Each block has two outputs Trip matrix logic TMAGGIO function is used to where one is inverted.

  • Page 24: Monitoring

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 configuration, initiating conditions, recording 10. Monitoring times, and large storage capacity. A disturbance is defined as an activation of an Measurements CVMMXN, CMMXU, input to the AxRADR or BxRBDR function...
  • Page 25 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 perspective (for example corrective actions) Event recorder DRPRDRE and long perspective (for example functional analysis). Quick, complete and reliable information about disturbances in the primary and/or in the...

  • Page 26: Metering

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 and accumulated energy. The energy is Station battery supervision calculated from the measured input currents as SPVNZBAT a sum of I 2 t values. Alarms are generated...

  • Page 27: Human Machine Interface

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 The LHMI is simple and easy to understand. 12. Human Machine The whole front plate is divided into zones, interface each with a well-defined functionality: • Status indication LEDs •...

  • Page 28: Station Communication

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 In the IED, the internal time can be Authority status ATHSTAT synchronized from a number of sources: Authority status (ATHSTAT) function is an • SNTP indication function block for user log-on activity.
  • Page 29 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 available to any Ethernet based application via Table 1. Supported communication interface FTP in the standard Comtrade format. Further, and protocol alternatives the IED can send and receive binary values,...

  • Page 30: Hardware Description

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 that can interpret IEC 60870-5-103 Flush mounting the IED communication messages. 15. Hardware description Layout and dimensions Mounting alternatives The following mounting alternatives are available (IP40 protection from the front): IEC09000672.ai...
  • Page 31 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Rack mounting the IED IEC09000673.ai IEC09000673 V1 EN IEC09000676.ai Figure 6. Flush mounted IED IEC09000676 V1 EN Figure 7. Rack mounted IED 222 mm 27 mm...
  • Page 32 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 IEC09000677.ai IEC09000677 V1 EN Figure 8. Two rack mounted IEDs side by side 224 mm + 12 mm with ring-lug connector 25.5 mm 482.6 mm (19") GUID-5C185EAC-13D0-40BD-8511-58CA53EFF7DE V1 EN Figure 10.

  • Page 33: Connection Diagrams

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 16. Connection diagrams 1MRK006502-LB 2 PG 1.1 ANSI V1 EN Figure 11. Designation for 6U, 1/2x19" casing with 1 TRM (A01A/A11A/B11A)
  • Page 34 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Connection diagrams for REQ650 A01A 1MRK006502-LB 3 PG 1.1 ANSI V1 EN Figure 12. Communication module (COM) 1MRK006502-LB 4 PG 1.1 ANSI V1 EN Figure 13. Power supply module (PSM) 48-125V DC...
  • Page 35 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 1MRK006502-LB 5 PG 1.1 ANSI V1 EN Figure 14. Power supply module (PSM), 110-250V DC 1MRK006502-LB 6 PG 1.1 ANSI V1 EN Figure 15. Transformer module (TRM)
  • Page 36 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 1MRK006502-LB 7 PG 1.1 ANSI V1 EN Figure 16. Binary input/output (BIO) option (Terminal X321, X324) Connection diagrams for REQ650 A11A 1MRK006502-RB 3 PG 1.1 ANSI V1 EN Figure 17. Communication module (COM)
  • Page 37 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 1MRK006502-RB 4 PG 1.1 ANSI V1 EN Figure 18. Power supply module (PSM) 48-125V DC 1MRK006502-RB 5 PG 1.1 ANSI V1 EN Figure 19. Power supply module (PSM), 110-250V DC...
  • Page 38 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 1MRK006502-RB 6 PG 1.1 ANSI V1 EN Figure 20. Transformer module (TRM) 1MRK006502-RB 7 PG 1.1 ANSI V1 EN Figure 21. Binary input/output (BIO) option (Terminal X321, X324)
  • Page 39 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 1MRK006502-RB 8 PG 1.1 ANSI V1 EN Figure 22. Binary input/output (BIO) option (Terminal X326, X329) Connection diagrams for REQ650 B11A 1MRK006502-SB 3 PG 1.1 ANSI V1 EN Figure 23. Communication module (COM)
  • Page 40 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 1MRK006502-SB 4 PG 1.1 ANSI V1 EN Figure 24. Power supply module (PSM) 48-125V DC 1MRK006502-SB 5 PG 1.1 ANSI V1 EN Figure 25. Power supply module (PSM), 110-250V DC...
  • Page 41 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 1MRK006502-SB 6 PG 1.1 ANSI V1 EN Figure 26. Transformer module (TRM) 1MRK006502-SB 7 PG 1.1 ANSI V1 EN Figure 27. Binary input/output (BIO) option (Terminal X321, X324)
  • Page 42 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 1MRK006502-SB 8 PG 1.1 ANSI V1 EN Figure 28. Binary input/output (BIO) option (Terminal X326, X329)

  • Page 43: Technical Data

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 17. Technical data General Definitions Reference The specified value of an influencing factor to which are referred the value characteristics of the equipment Nominal The range of values of an influencing quantity (factor) within which, under...
  • Page 44 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Analog inputs Table 2. Energizing inputs Description Value Rated frequency 50/60 Hz Operating range Rated frequency ± 5 Hz Current inputs Rated current, I 0.1/0.5 A...
  • Page 45 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Auxiliary DC voltage Table 3. Power supply Description 600PSM02 600PSM03 100, 110, 120, 220, 240 V AC, 48, 60, 110, 125 V DC 50 and 60 Hz...
  • Page 46 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 5. Signal output and IRF output IRF relay change over - type signal output relay Description Value Rated voltage 250 V AC/DC Continuous contact carry Make and carry for 3.0 s...
  • Page 47 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 7. Power output relays with TCM function Description Value Rated voltage 250 V DC Continuous contact carry Make and carry for 3.0 s 15 A Make and carry for 0.5 s...
  • Page 48 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 11. Serial rear interface Type Counter connector Serial port (X9) Optical serial port, type ST for IEC 60870-5-103 Influencing factors Table 12. Degree of protection of flush-mounted IED...
  • Page 49 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 15. Environmental tests Description Type test value Reference Cold tests operation 96 h at -25ºC IEC 60068-2-1/ANSI 16 h at -40ºC C37.90-2006 (chapter 4) storage 96 h at -40ºC...
  • Page 50 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Type tests according to standards Table 16. Electromagnetic compatibility tests Description Type test value Reference 100 kHz and 1 MHz burst IEC 61000-4-18 disturbance test IEC 60255-22-1, level 3 ANSI C37.90.1-2002...
  • Page 51 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 16. Electromagnetic compatibility tests, continued Description Type test value Reference • 3 s 1000 A/m • Continuous 100 A/m Power frequency immunity IEC 60255-22-7, class A...
  • Page 52 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 17. Insulation tests Description Type test value Reference Dielectric tests: IEC 60255-5 ANSI C37.90-2005 • Test voltage 2 kV, 50 Hz, 1 min 1 kV, 50 Hz, 1 min,...

  • Page 53: Phpioc

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 19. Product safety Description Reference LV directive 2006/95/EC Standard EN 60255-27 (2005) EMC compliance Table 20. EMC compliance Description Reference EMC directive 2004/108/EC Standard EN 50263 (2000)

  • Page 54: Sptpioc

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 22. Instantaneous phase overcurrent protection SPTPIOC (50) Function Range or value Accuracy ± 1.0% of I at I £ I Operate current (5-2500)% of lBase ±...

  • Page 55: Oc4Ptoc

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 23. Four step phase overcurrent protection OC4PTOC (51/67) Function Setting range Accuracy ± 1.0% of I Operate current (5-2500)% of lBase at I ≤ I ±...
  • Page 56 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 24. Four step phase overcurrent protection OC4SPTOC (51_67) Function Setting range Accuracy ± 1.0% of I at I £ I Operate current (5-2500)% of lBase ±...
  • Page 57 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 25. Instantaneous residual overcurrent protection EFPIOC (50N) Function Range or value Accuracy ± 1.0% of I at I £ I Operate current (1-2500)% of lBase ±...
  • Page 58 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 26. Four step residual overcurrent protection EF4PTOC (51N/67N) Function Range or value Accuracy ± 1.0% of I at I £ I Operate current (1-2500)% of lBase ±...
  • Page 59 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 27. Sensitive directional residual overcurrent and power protection SDEPSDE (67N) Function Range or value Accuracy ± 1.0% of I at I £ I (0.25-200.00)% of lBase Operate level for 3I ·cosj...
  • Page 60 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 27. Sensitive directional residual overcurrent and power protection SDEPSDE (67N) , continued Function Range or value Accuracy ± 2.0 degrees Relay characteristic angle (-179 to 180) degrees ±...

  • Page 61: Lpttr

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 28. Thermal overload protection, one time constant LPTTR (26) Function Range or value Accuracy ± 1.0% of I Reference current (0-400)% of IBase ± 1.0°C Reference temperature (0-600)°C...
  • Page 62 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 29. Breaker failure protection CCRBRF (50BF) Function Range or value Accuracy ± 1.0% of I at I £ I Operate phase current (5-200)% of lBase ±...
  • Page 63 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 31. Stub protection STBPTOC (50STB) Function Range or value Accuracy ± 1.0% of I at I £ I Operating current (1-2500)% of IBase ± 1.0% of I at I > I Reset ratio >...

  • Page 64: Guppdup

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 34. Directional over/underpower protection GOPPDOP, GUPPDUP (32/37) Function Range or value Accuracy Power level (0.0–500.0)% of SBase ± 1.0% of S at S < S ±...

  • Page 65: Issued: April

    Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Voltage protection Table 36. Two step undervoltage protection UV2PTUV (27) Function Range or value Accuracy Operate voltage, low and high (1–100)% of VBase ± 0.5% of V...
  • Page 66 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 37. Two step overvoltage protection OV2PTOV (59) Function Range or value Accuracy Operate voltage, low and high (1-200)% of VBase ± 0.5% of V at V < V step ±...
  • Page 67 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 38. Two step residual overvoltage protection ROV2PTOV (59N) Function Range or value Accuracy Operate voltage, step 1 (1-200)% of VBase ± 0.5% of V at V < V ±...
  • Page 68 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Frequency protection Table 40. Under frequency protection SAPTUF (81) Function Range or value Accuracy Operate value, pickup function (35.00-75.00) Hz ± 2.0 mHz Operate value, restore frequency (45 - 65) Hz ±...
  • Page 69 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 42. Rate-of-change frequency protection SAPFRC (81) Function Range or value Accuracy Operate value, pickup function (-10.00-10.00) Hz/s ± 10.0 mHz/s Operate value, restore enable frequency (45.00 - 65.00) Hz ±...
  • Page 70 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 45. Breaker close/trip circuit monitoring TCSSCBR Function Range or value Accuracy Operate time delay (0.020 - 300.000) s ± 0,5% ± 110 ms Control Table 46. Synchronizing, synchronism check and energizing check SESRSYN (25)
  • Page 71 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 47. Autorecloser SMBRREC (79) Function Range or value Accuracy Number of autoreclosing shots 1 - 5 Autoreclosing open time: shot 1 - t1 3Ph (0.000-60.000) s ±...
  • Page 72 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 48. Autorecloser STBRREC (79) Function Range or value Accuracy Number of autoreclosing shots 1-5 Autoreclosing open time: Shot (0.000-60.000) s ± 0.5% ± 25 ms...
  • Page 73 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 50. Tripping logic SPTPTRC (94) Function Range or value Accuracy Trip action 3-Ph, 1/3-Ph Timers (0.000-60.000) s ± 0.5% ± 10 ms Table 51. Configurable logic blocks...
  • Page 74 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Monitoring Table 52. Measurements CVMMXN Function Range or value Accuracy ± 0.5% of V Voltage (0.1-1.5) ×V at V£V ± 0.5% of V at V > V ±...
  • Page 75 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 54. Disturbance report DRPRDRE Function Range or value Accuracy Current recording ± 1,0% of I at I ≤ I ± 1,0% of I at I > Ir Voltage recording ±...
  • Page 76 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 55. Event list DRPRDRE Function Value Buffer capacity Maximum number of events in 1000 the list Resolution 1 ms Accuracy Depending on time synchronizing Table 56. Indications DRPRDRE...
  • Page 77 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 59. Disturbance recorder DRPRDRE Function Value Buffer capacity Maximum number of analog inputs Maximum number of binary inputs Maximum number of disturbance reports 100 Maximum total recording time (3.4 s recording time and...
  • Page 78 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 62. Insulation liquid monitoring function SSIML(71) Function Range or value Accuracy Alarm, oil level 0.00-25.00 Oil level lockout 0.00-25.00 Temperature alarm -40.00-200.00 Temperature lockout -40.00-200.00 Timers (0.000-60.000) s...
  • Page 79 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 66. Degree of protection of flush-mounted IED Description Value Front side IP 40 Table 67. Degree of protection of the LHMI Description Value Front and side...
  • Page 80 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Inverse time characteristics Table 69. ANSI Inverse time characteristics Function Range or value Accuracy Operating characteristic: td = (0.05-999) in steps of 0.01 unless otherwise stated æ...
  • Page 81 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 70. IEC Inverse time characteristics Function Range or value Accuracy Operating characteristic: td = (0.05-999) in steps of 0.01 æ ö ç ÷ × ç...
  • Page 82 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 72. Inverse time characteristics for overvoltage protection Function Range or value Accuracy Type A curve: td = (0.05-1.10) in steps of 0.01 Class 5 +40 ms unless otherwise stated æ...
  • Page 83 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 73. Inverse time characteristics for undervoltage protection Function Range or value Accuracy Type A curve: td = (0.05-1.10) in steps of 0.01 Class 5 +40 ms unless otherwise stated æ...
  • Page 84 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Table 74. Inverse time characteristics for residual overvoltage protection Function Range or value Accuracy Type A curve: td = (0.05-1.10) in Class 5 +40 ms steps of 0.01 æ...

  • Page 85: Ordering

    To obtain the complete ordering code, please combine code from the tables, as given in the example below. Exemple code: REQ650*1.1-A01AX00-X00-B1A5-B-A-SA-AB1-RA3-AXXX-E. Using the code of each position #1-11 specified as REQ650*1-2 2-3-4 4-5-6-7 7-8 8-9 9-10 10 10 10-11 - 10...
  • Page 86 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Casing Notes and Rules Rack casing, 6 U 1/2 x 19" Selection for position #5. Mounting details with IP40 of protection from the front Notes and Rules No mounting kit included Rack mounting kit for 6 U 1/2 x 19"...
  • Page 87 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Connection type for Analog modules Notes and Rules Ringlug terminals Analog system Slot position: Transformer module, 4I, 1/5A+1I, 0.1/0.5A+5U, 100/220V Selection for position #9. Binary input/output module...
  • Page 88 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Manuals Note: One (1) IED Connect CD containing user documentation (Operation manual, Technical manual, Installation manual, Commissioning manual, Application manual, Communication protocol manual, DNP, Communication protocol manual, IEC61850, Communication protocol manual, IEC60870-5-103, Type test certificate, Engineering manual and Point list manual, DNP3, Connectivity packages and LED label template is always included for each IED.
  • Page 89 Breaker protection REQ650 ANSI 1MRK 505 269-BUS - Product version: 1.1 Issued: April 2011 Reference information For our reference and statistics we would be pleased to be provided with the following application data: Country: End user: Station name: Voltage level:...
  • Page 91 ABB Inc. 3450 Harvester Road Burlington, ON L7N 3W5, Canada Phone Toll Free: 1-800-HELP-365, menu option #8 ABB Mexico S.A. de C.V. Paseo de las Americas No. 31 Lomas Verdes 3a secc. 53125, Naucalpan, Estado De Mexico, MEXICO Phone (+1) 440-585-7804, menu...

This manual is also suitable for:

Rel650

Table of Contents