Toshiba TOSVERT VF-S15 Manual page 71

Notes:
There are problems of display on the Drive Monitor in PNE001Z (no suffix).
These problems are corrected in PNE001Z-1.
①
②
③
④
⑤
There is a problem in the display of the above ① - ⑧.
The following table shows an example of the display and countermeasures.
Display title Problem
① Motor
The value is
cumulative displayed in 1/10
load factor times
② Drive
The value is not
cumulative displayed
load factor correctly
③ Pulse train
The value is
input (S2) displayed in 1000
value times
④ Input
The value is
watt-hour displayed in 1/10
times
⑤ Output
The value is
watt-hour displayed in 1/10
times
⑥ （S2）
The value is not
displayed
correctly
⑦ FM
The value is not
displayed
correctly
⑧ （OUT）
The value is not
displayed
correctly
⑥
⑦
⑧
Example of the Example of the
display display
(Wrong data) (Correct data)
6.8 67.9
1.3 45.7
1920 1.9
1.2 12.3
3.2 32.1
0.0 1920
97.0 97.6
9.0 9.9
- 68 -
Countermeasures
Please calculate the value at 10 times
About Inverter cumulative load factor(%) ,
please check the information by the key
pad etc.
Please calculate the value at 1/1000
times
Please calculate the value at 10 times
Please calculate the value at 10 times
About Pulse train input value (pps) ,
please check the information by the key
pad etc.
About FM output value (%) , please
check the information by the key pad etc.
About Pulse train output value (pps) ,
please check the information by the key
pad etc.
E6582051