Siemens SINAMICS S120 Manual page 34

Line-Side Power Components
2.1 Introduction
Figure 2-2
Note
The limit values for the radio interference voltage are only complied with when a line reactor
and a line filter, Category C2 acc. to EN 61800-3, are used.
CAUTION
The following can occur if line reactors/line filters are used, which have not been approved
for SINAMICS by SIEMENS:
- the Power Modules could be damaged/destroyed.
- Line reactions can occur that can damage or interfere with other loads powered from the
same network.
CAUTION
The Power Modules in blocksize format with line filters are only suitable for direct
connection to TN line supplies.
34
Line connection, chassis
Manual, (GH6), 07/2007 Edition, 6SL3097-2AL00-0BP2
AC Drive