Cabinet Design and EMC for Components, Blocksize Format
9.4 Arrangement of components and equipment
9.4.2
Mounting
The components should be mounted on a conductive mounting surface to ensure low
impedance between the component and the mounting surface. Mounting plates with a
galvanized surface are suitable.
Figure 9-1
Wiring rules for DRIVE-CLiQ
Refer to /IH1/ SINAMICS Commissioning Manual.
300
Mounting the CU310 onto the Power Module PM340 (frame size FSD)
Manual, (GH6), 07/2007 Edition, 6SL3097-2AL00-0BP2
AC Drive