NEC SL1100 Networking Manual page 187

NEC SL1100
Program
Program Name
Number
IP Telephone
Terminal Basic
15-05-45
Data Setup – NAT
Plug and Play
84-10-XX ToS Setup
DR700 Multiline
84-22-01 Logon Information
Setup – User ID
DR700 Multiline
84-22-02 Logon Information
Setup – Password
DR700 Multiline
Logon Information
84-22-03
Setup – User ID
Omission
DR700 Multiline
84-22-04 Logon Information
Setup – Log Off
DR700 Multiline
84-22-05 Logon Information
Setup – Nickname
DR700 Multiline
Basic Information
84-23-01 Setup –
Registration Expire
Timer
Networking Manual
Description/Comments
Effective when Program 10-46-14
is set to NAT Mode. Select sending
RTP port number to remote router,
use from negotiation result (0) or
received RTP packet (1).
Assignments deal with setting of
the Layer 3 IP Header ToS field as
it leaves the VoIPDB unit.
Specify the protocol to assign the
ToS field for, and select the
populated field to conform to either
IP Precedence or Differentiated
Services.
When setting IP Precedence,
assign Priority, Delay, Throughput,
and Reliability in Programs
84-10-01/02/03/04/05.
When setting DiffServ, only assign
the DSCP in Program 84-10-07.
User ID for Manual or Auto
registration (Program 10-46-01).
Password for Manual or Auto
registration (Program 10-46-01).
When set to manual login mode,
the user ID is omitted from the
display during entry by the user.
Allow the ability to log off from the
IP terminal when using manual
registration mode.
Assign up to 32 Alpha/Numeric
characters.
At half the value of this timer the IP
terminal sends another registration
message to the CPU.
Assigned Data
0 = Off
1 = On
Default is 0
Protocol Type
0 = Networking
2 = RTP/RTCP
3 = SIP
4 = DR700
5 = SIP Trunk
Assign up to 32 Alpha/
Numeric Characters
Default is No Setting
Assign up to 16 Alpha/
Numeric Characters
Default is No Setting
0 = Off
1 = On
Default is 0
0 = Off
1 = On
Default is 1
Assign up to 32 Alpha/
Numeric Characters
Default is No Setting
Range: 60~65535
Sec.
Default is 180
Issue 6.0
1 2 3
X
X
X
X
X
X
X
X
9 - 53