Show Server Security Command; Show Server Snmp Command; Show User Command - HP 16-port SCS Installation Instructions Manual

Show Server Security command

The Show Server Security command displays the current authentication, connection, and lock-out settings that
were configured with the Server Security and Server SSH commands.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server security
Table 5-33 Show Server Security command display fields
Field
Authentication
Encryption
Lockout
Fingerprint (Hex)
Fingerprint (BB)

Show Server SNMP command

The Show Server SNMP command displays SNMP configuration information.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server snmp
Table 5-34 Show Server SNMP command display fields
Field
Server SNMP
Read Community
Write Community
Trap Community
SNMP Manager
Test Dests
Enable Traps

Show User command

The Show User command displays information about one or all users.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show user[<username>|all]
Table 5-35 Show User command parameters
Parameter
<username>
Content
Configured authentication methods. This includes the SSH authentication method configured with the
Server SSH command (or the default value), regardless of whether SSH is enabled.
Configured connection methods.
Configured security lock-out state (Enabled or Disabled). If Enable, the number of hours in the
lock-out period is included.
SSH key MD5 hash.
SSH key bubble babble.
Content
Enable if SNMP processing is enabled; Disable if SNMP processing is disabled (from server
SNMP command).
Read community name (from Server SNMP Community command).
Write community name (from Server SNMP Community command).
Trap community name (from Server SNMP Community command).
SNMP management entity IP addresses (from Server SNMP Manager command). If no SNMP
managers have been added or if they are all deleted, this field will indicate none.
Destinations for enabled SNMP traps (from Server SNMP Trap Destination command).
Names of SNMP traps that have been enabled (from Server SNMP Trap command).
Description
User name
Default: User currently logged in
SCS commands 72