•
If you change the router configuration (refer to "27.10 Router Configuration—VPN—[3-2] IPSec" in the PC
Programming Manual), the affected unit's system must be restarted in order to rebuild the VPN connection.
At that time, service will be temporarily unavailable.
•
It is not possible to use VPN connections using the built-in router for P2P connection as shown in the
following diagrams. In this case, separate P2P groups must be used (refer to "15.1.5 Peer-to-Peer (P2P)
Connection" in the Feature Manual).
Example 1
KX-NS1000
Example 2
KX-NS1000
PC Programming Manual References
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status
27.10 Router Configuration—VPN—[3-2] IPSec
8.6.24 VPN—VPSS Setting
Description
The VPSS (VPN Simple Setting) feature allows you to automatically create a complex, full-mesh VPN. When
constructing a multi-site system with KX-NS1000 PBXs, you can create a VPN with IPsec to ensure secure
communication between sites, but with VPSS, a complex, full-mesh VPN can be created automatically, as
shown in the following figure. This VPN between sites can be easily created and maintained.
Document Version 2016-03
Smartphone
Smartphone
KX-NS1000
IP Extension
Smartphone
8.6.24 VPN—VPSS Setting
Installation Manual
371