Table of Contents
Advertisement
10 Setup Menu
Program Number Display the program/Channel number of the current channel
Skip
Program Name
Color System
Sound System
Auto Search
Manual Search
SETUP
Update Search
Fine Tunning
Program Edit
11 Geometric Menu
GEOMETRIC
Note : 1) The Geometric menu will be enable for VGA/PC source only. SETUP, VIDEO menu is disable
for VGA source.
2)
SETUP
menu is disabled when PIP/POP is ON.
3)
SETUP
menu is disabled when parental switch is ON, simillarly when hotel mode switch and disable
search is ON user can not enter SETUP menu.
Make this switch On to skip the selected channel,
the skipped channel can be viewed by entering channel number
To give the channel name press Ok on this option and use
Up/Down key to select letters and Left/Right key to navigate
Change the color system(AUTO/PAL/SECAM) setting if
picture is not reproduced properly
Note : For INDIA Color system is AUTO or PAL
Change the sound system (BG/I/DK) setting if sound is not
reproduced properly
Note : For INDIA Sound system is BG
Select this function, TV set will start auto tuning, for all
available channels
Select this function for Manual Searching the channels, select channel number,
in PR start-on for which user wants manual search. Start from-the frequency
from which the tunning will start. Start search-press Ok to start manual
tuning
Use this function to update the new frequencies in transmission
or deleted channels and appends last to the current list of
channels without disturbing them.
Select this option for Fine tunning the channel at which either
Picture or Sound is not clear even after Auto Searching.
User can edit the programs by Swap, Insert, Copy, Delete operation
1.To swap, Navigate to a channel to be swapped (selection bar
appears on it) press 1, navigate to another channel press OK,
these two channels are swapped
2.To insert, Navigate to a channel press 2, navigate where the channel
has to be inserted
3.To copy, Navigate to a channel press 3, navigate where the channel
to be copied press OK the selected channel will be copied here
4.To delete, Navigate to a channel to delete, press 4, the channel will be deleted.
Contrast
Adjust these settings for fine adjustments of the Contrast
Brightness
(0-100), Brightness(0-100) of pc picture on TV screen
Auto setting allows the PC screen of TV to self adjust. This
Auto Setting
automatically sets the H-position ,V - position, Phase and clock
Phase
Adjust the phase(0-31) and clock(0-255) to remove or reduce
picture noise.if noise appears adjust frequency by clock for
Manual Clock
fine adjustments
If picture is not Ok with auto setting then adjust Horrizontal
H Position
position(0-255) / Vertical position (0-63) manually to adjust
V Position
the desired picture settings
press OK the selected channel will be
inserted here
EN 15
Advertisement
Table of Contents
