D-Link DIR-825/AC User Manual page 177

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Figure 135. The page for changing the settings of the router's port.
On the opened page, specify the needed parameters:
Parameter
Speed
Port WAN / LAN
Data transfer mode.
Auto
Select the value to enable autonegotiation.
selected, the Autonegotiation modes and Flow control
sections are displayed.
Select the 10M-Half, 10M-Full, 100M-Half, or 100M-Full value
to manually configure speed and duplex mode for the selected port:
10M-Half: Data transfer in just
•
can be either sent or
of up to 10Mbps.
10M-Full: Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
100M-Half: Data transfer in just
•
can be either sent or
Page 177 of 257
Configuring via Web-based Interface
Description
one direction at a time
received) at the maximum possible
rate of up to 10Mbps.
one direction at a time
received) at the maximum possible
When this value is
(data
rate
at the
(data
rate