Security Settings - D-Link DIR-825/AC User Manual

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual

Security Settings

On pages of the Wi-Fi / Security settings section, you can modify security settings of the
WLAN. To configure the 2.4GHz band or 5GHz band, proceed to the relevant page.
By default, the WPA2-PSK network authentication type is specified for both bands of the WLAN.
WPS PIN from the barcode label is used as the network key.
In the BSSID drop-down list, the unique identifier of the Wi-Fi network is displayed. If your
network is split into parts, in the BSSID list, select the part for which the security settings should be
changed.
When you split the network into parts, an additional wireless network with the Open network
authentication type with no encryption is specified. It is strongly recommended to specify individual
security settings for your network.
Figure 118. The default security settings.
Page 147 of 257
Configuring via Web-based Interface