CHAPTER 9: ABOUT THE D400 APPLICATIONS
About the DNP3 software
D400 SUBSTATION GATEWAY INSTRUCTION MANUAL
Application Name
System Utilities
System Point Database
HMI Access Manager
User Management
One-Line Designer & Viewer
IEC 61850 Loader
Secure Enterprise Connectivity
The DNP3 (Distributed Network Protocol) software in the D400 is layered to be consistent
with the International Electrotechnical Commission (IEC) Enhanced Protocol Architecture
(EPA); see Figure 56.
The protocol software comprises a Physical Layer, Data Link Layer and Application Layer.
Both the DNP3 client and server applications implement the Application Layer and Data
Link Layer and support the serial Physical Layers. The Ethernet layer is implemented using
separate software, the DNP3 Transport Layer application.
Figure 56: EPA Layers for the DNP3 software
Application Layer
Data Link Layer
Physical Layer
Redundancy Mode
Warm Standby
D400 System Point Database
DNP3 client and server
DNP3 client and server
DNP3 Transport applications (client and server)
GE INFORMATION
License
required
Hot Standby
Yes
Yes
117