Philips DreamStation Go User Manual page 39

7. Battery Pack
2. Remove the battery pack end cap on the therapy device.
3. Slide the battery pack onto the device where the end cap was. Make sure the bat-
tery pack latches onto the therapy device.
4. Attach the AC power cord to the battery pack and then to the AC outlet.
To use the battery pack in standalone mode, follow these steps:
1. Make sure the battery pack is fully charged. Disconnect the power cord from the
AC outlet and disconnect the power cord from the therapy device. It can now be
used with your therapy device as an external battery pack.
2. Remove the battery pack end cap on the therapy device.
3. Slide the battery pack onto the device where the end cap was. Make sure the bat-
tery pack latches onto the therapy device.
4. Momentarily push the battery pack push button to wake up the battery pack.
36