Configuration
8.6
Network setup
8.6.1
Network screen
40
Siemens Building Technologies
Fire Safety & Security Products
In the main screen, use the Left or Right arrow buttons to display the Network
menu.
Fig. 30
Network menu
Highlight Network in the Network menu and press the
The Network setup screen displays.
You will be able to change the Network, Mail and Callback settings.
Fig. 31
Network setup screen
Network
1.
Highlight the first box beside Transfer Speed.
2.
Press the Up and Down arrow buttons to set the Transfer Speed from
50 Kbps to 100 Mbps.
3.
Highlight the second box beside Transfer Speed.
You can select the unit of measure for the transfer speed between: bps and
ips.
4.
Press the
button to set the transfer speed.
5.
Highlight the box beside Quality and press the
You can select the quality from: Very High, High, Standard and Low.
6.
Press the
button to set the Quality.
NOTE
The higher Quality settings require higher Transfer Speed settings. The transfer speed you set is the
maximum speed. Depending on the network environment, this speed may not be achieved.
button.
button.
03.2007