Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

15.2.4 GOT Side Settings


Setting communication interface
(Communication settings)
Set the channel of the connected equipment.
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: SIEMENS
• Controller Type: Set either of the following.
S7-300/400
S7-200
• I/F: Interface to be used
• Driver: Set either of the following.
When connecting to SIEMENS S7-300/400:
SIEMENS S7-300/400
When connecting to SIEMENS S7-200:
SIEMENS S7-200
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
15.2.4 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.2 I/F communication setting

(1) SIEMENS S7-300/400
3.
4.
Transmission
Speed
Data Bit
Stop Bit
Click!
Parity
Adapter
Address
Host Address
Communication detail settings
Make the settings according to the usage environment.
Item Description
Set this item when change the
transmission speed used for
communication with the connected
*2
equipment.
(Default: 38400bps)
Set this item when change the data
length used for communication with
the connected equipment.
(Default: 8bit)
Specify the stop bit length for
communications.
(Default: 1bit)
Specify whether or not to perform a
parity check, and how it is performed
during communication.
(Default: Odd)
Specify the adapter address (station
No. of the adapter to which the GOT
is connected) in the connected
*1*2
network.
(Default: 1)
Specify the host address (station No.
of the PLC that the GOT will monitor)
*1*2
in the connected network.
(Default: 2)
*1 Set the address without overlapping the address of other
units.
*2 The GOT automatically sets the values of Transmission
Speed, Adapter Address, and Host Address to the HMI
Adapter.
15. CONNECTION TO SIEMENS PLC
15.2 Serial Connection
Range
9600bps,
19200bps,
38400bps
8bit (fixed)
1bit (fixed)
Odd (fixed)
1 to 31
1 to 31
15
15 - 7