12.7
Simulation and simultaneous recording
For more complex machining processes, you can check the result of your inputs with the aid
of the simulation, without having to traverse the axes (see Section "Simulating machining
(Page 193)"). The execution of the work steps is graphically displayed on the screen during
this.
Note
In "Manual Machine", you can simulate a work step with an already opened and filled out
parameter screen form.
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Software option
You require the option "Simultaneous recording (real-time simulation)" for the
simultaneous recording of the work steps.
Working with Manual Machine
12.7 Simulation and simultaneous recording
525