Traversing Axes - Siemens SINUMERIK 840D SL Operating Manual

12.5.1

Traversing axes

For preparatory actions and simple traversing movements, input the parameters directly into
the "Manual Machine" input fields of the basic screen.
Tool selection
Tool selection
Machining
...
...
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
1. "Manual Machine" is active.
2. Select the desired tool in "T".
3. Enter the feedrate (F) and the spindle speed (S).
4. Select the direction of spindle rotation (e.g. clockwise direction of
rotation):
- OR -
Set the direction of rotation via the machine control panel.
5. Press the <CYCLE START> key.
The spindle starts immediately after the tool is selected.
Note:
Please refer to the machine manufacturer's specifications.
6. Select the axis to be traversed on the machine control panel.
7. Press the <+> or <-> key on the machine control panel.
- OR -
Select the direction with the aid of the cross-switching lever.
The axes are moved at the set machining feedrate.
Note:
Please refer to the machine manufacturer's specifications.
The active direction is graphically displayed in the basic screen by
means of the wind rose.
Working with Manual Machine
12.5 Simple workpiece machining
517