Hitachi FHD7510PC Operation Manual page 17

TURNING POWER ON/OFF
Press the power button (button "10" on device or
power button on Remote controller) to turn the
power ON/OFF.
Caution!
• When using the POWER button to turn the
interactive monitor off and back ON, always wait
for power LED is ON. İnteractive monitor can be
turned back OFF safely after seeing power LED is
ON.
A short interval may result in a malfunction.
• For a complete electrical disconnection, pull out
the main power plug.
Status of LED
ON
OFF
Tips
• After turning the interactive monitor off, it will
automatically enter standby mode approximately
60 sec. later.
16
Status of the Monitor&PC
Power Off/Standby mode
On