Mounting Precautions - Hitachi FHD7510PC Operation Manual

MOUNTING PRECAUTIONS

• This interactive monitor is for use indoor use only.
• A mounting bracket compliant with VESA
specifications is required.
• Since the interactive monitor is heavy, consult
your dealer before installing, removing or moving
the interactive monitor.
• Mounting the interactive monitor on the wall
requires special expertise and the work must be
performed by an authorized dealer. You should
never attempt to perform any of this work yourself.
Our company will bear no responsibility for
accidents or injuries caused by improper mounting
or mishandling.
• Use the interactive monitor with the surface
perpendicular to a level surface.
• This interactive monitor should be used at an
ambient temperature between 32°F (0°C) and 104°F
(40°C). Provide enough space around the interactive
monitor to prevent heat from accumulating inside.
• If it is difficult to provide sufficient space for any
reason such as the installation of the interactive
monitor inside housing, or if the ambient
temperature may be outside of the range of 32°F
(0°C) to 104°F (40°C), install a fan or take other
measures to keep the ambient temperature within
the required range.
• Do not block any ventilation openings. If the
temperature inside the interactive monitor rises,
this could lead to a malfunction.
• Do not place the interactive monitor on a device
which generates heat.
• Adhere to the following when installing the
interactive monitor in its portrait orientation.
Failing to adhere to the following may cause
malfunctions.
- Install the interactive monitor such that the power
LED is located on the bottom side.
• Be careful not to cover the remote control sensor
or buttons.
9