Figure 4.3 Smc Format - Samsung OFFICESERV 7100 Service Manual

CHAPTER 14. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
2) If the following window appears, enter [Y] and press the [ENTER] key.
Manufacturer's code is
Device code is
UID code is
Fourth code is
SAMSUNG 16 MB Smartmedia (3.3V)
Bad Block= 1(zone=0)
Do you want to re-test all block for recovering SmartMedia(y/n)? y
3) Then, formatting is started. The procedure of formatting is displayed on the bottom of
the window, and if formatting is being done normally, the [Format Menu] window
appears again. Then, formatting of the SMC has been perfectly completed. To move to
the initial window, press the [P] key.
4-4
ec
73
a5
bb

Figure 4.3 SMC Format

© SAMSUNG Electronics Co., Ltd.