Panasonic KX-NS1000 Pc Programming Manual page 44

2.1.4 Easy Setup Wizard
Number of UM Group
Extension Number
Floating Extension Number
UM Group
DISA (1-64)
TAFAS (Pager)
ICD Group (1-64)
UM Channel (1-2)
FAX Channel
e.
Click Next.
3.
In LAN Setting, the IP addresses for the PBX, DNS server, and DSP cards can be assigned automatically
through a DHCP server or entered manually.
When using a DHCP server:
a.
Select Obtain an IP address automatically.
b.
Select Obtain DNS server address automatically.
c.
Select Obtain DSP IP address automatically.
Notice
The boxes will turn grey and the IP address information will be assigned automatically. Write down
the address information assigned to the PBX for future reference.
d.
Click Next.
When not using a DHCP server:
a.
Select Use the following IP address.
b.
Enter an IP address
be specified depending on your network configuration.)
c.
Select Use the following DNS server address.
d.
Enter the preferred and alternative DNS IP addresses
e.
Select Use the following DSP IP address.
f.
Enter up to 2 IP addresses
g.
Click Next.
4.
In Registration Setting, the IP Terminal Registration Mode and the One Look Networking (Trial
Activation Key) can be set.
a.
Select the IP Terminal Registration Mode:
•
Manual: Select this mode to manually register IP terminal information.
•
Full Automatic: Select this mode to automatically register IP terminal information.
•
Extension Number Input: Select this mode to automatically register IP terminal information except
its extension number. The extension number can then be registered from the IP telephone
manually.
44 PC Programming Manual
3 digits
Extension
Number
8
101–xxx
500–507
536–599
600
601–664
508, 509
510
, Subnet Mask , and Default Gateway
*1 *2
for each installed DSP card.
*1
3 digits
4 digits Extension,
Extension 4 digits
Number DISA & UM
channel
16 9
1001–xxxx 101–xxx
5000–5015 500–508
5801–5864 5801–5864
6000 600
6001–6064 601–664
5101, 5102 5101, 5102
5103 5103
. (The default gateway may not need to
*1
.
*1