Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T302
Specifies the maximum time allowed between each digit on an incoming call. Applies to overlap receiving.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T303
Specifies the maximum time that the PBX waits for a reply after sending the SETUP (call setting) message.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T304
Specifies the maximum time allowed between each digit on an outgoing call. Applies to overlap sending.
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T305
Specifies the maximum time that the PBX waits for a reply after sending the DISC (disconnection) message.
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T308
Specifies the maximum time that the PBX waits for a reply after receiving the Release message.
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
PC Programming Manual
279