Maintenance And Cleaning - Bosch GWS Professional 7-100 Original Instructions Manual

OBJ_BUCH-1474-005.book Page 8 Friday, November 27, 2015 1:20 PM
8 | English
Action
Removing rust, preparation
Drilling tiles, preparation
Mounting the quick-clamping nut
Dismounting the quick-clamping
nut
Switching On and Off
Adjusting the speed preselection
Working effectively with the angle
grinder
Grey-marked area: Handle
(insulated gripping surface)
Selecting the admissible grinding
tool
Selecting Accessories

Maintenance and Cleaning

 For safe and proper working, always keep the machine
and ventilation slots clean.
In extreme conditions, always use dust extraction as far
as possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD). When working met-
1 609 92A 1UE | (27.11.15)
Figure Please observe
5
6
7
8
9
10
11
12
13
–
als, conductive dust can settle in the interior of the power
tool. The total insulation of the power tool can be impaired.
Please store and handle the accessory(-ies) carefully.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Page
61
62
62 – 63
63
63
64
65
65
66
67 – 68
Bosch Power Tools