Kenwood CK 304 G Instructions For Use Manual page 18

BURNERS
The burners can be removed and washed with soapy water only.
They will remain perfect if always cleaned with products used for silverware.
After cleaning, check that the burner-caps and burner-heads are dry before placing
them in the respective housings.
Check that the electrode S (figs. 7.1, 7.3) is always clean to ensure trouble-free spark-
ing.
Check that the probe T (figs. 7.1, 7.3) next to each burner is always clean to ensure cor-
rect operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
Note:
The electrode S must be very carefully cleaned. To avoid damage to the electric
ignition do not use it when the burners are not in place.
C
F
T
S
Fig. 7.2
Fig. 7.1
18