Time Search 43 - Philips DV900VHS0I Owner's Manual

Time Search 43
Follow the steps below to program the DVD/VCR to search for-
ward or backward on a tape a specific length of time.There must
be a tape in the DVD/VCR.
• Before you begin,placethe DVD/VCR inVCR mode. Press the
DVD/VCR OUTPUT button so that the greenVCR light appears
on the front of the DVD/VCR. PresstheVCR/TV button so that
the VCR/TV light appearson the front of the DVD/VCR.
I
Press the VCR button, then press the _EARCH
MODE/TIME SEARCH button.
I TIME SEARCH 1
O:O0
N_R SEARCH TIME
2
Within 10 seconds, use the Number buttons to enter the
desired length of time you want to skip forward or back-
ward. For example, for I hour, 25 minutes, press Number buttons
I, 2, 5. Or, for five minutes, press Number buttons 0, O,5.
3
Within 10 seconds, press the F.FWD button or the
REW(ind) button. The DVD/VCR will skip over the specified
length of time, then begin playback.
m
-
I
_ov0w R Tl_
-c_ c3 _3 0
_3
CZ3 m C_3_
..... 6 0
"CI CD CD
_0 0 0""0 _0_
PHILIPS
If you want to search for more than
59 minutes, you must enter the
length of t_mein hours and minutes.
For example, to search forward 70
minutes, press I,I,0 at step 2.
Youcan not do a Time Search while
recording.
Toremove the _me Search display,
press the SEARCHMODE/TIME
SEARCHbu_on again.
Tocancel a Time Search that is in
progress,press the STOPbutton.
If the end of the tape is reached
during a Time Search,the Time
Search will be cancelled.The
DVD/VCR may rewind the tape.
Details are on page 45.