Hitachi IJ UX Service Manual page 274

6.4.19 Ink Level Sensor Broken (2)
Ink Level Sensor
Broken (2)
Was the validation of Ink ID
performed at Ink cartridge
bottle replacement?
Validate the Ink ID and replace
the Ink cartridge bottle.
Resume
operation
[Caution]
1. When this fault occurs, "Ink Low Warning 2" will be issued after one (1) hour passes.
This alarm is different from the prior and existing "Ink Low Warning". Then, the printer
goes into Stop status with "Ink Low Fault 2" displayed.
2. Ink can be ejected by pressing the Startup button on the Home screen.
6-56