Thermistor Replacement - Hitachi IJ UX Service Manual

5.11 Thermistor replacement

１
Remove the four (4) fixing screws, and then pull out the coupling to the direction of the arrow.
Fixixng screws
(2 pieces)
２ Remove the banding band and the packing.
[Caution]
Before removing the banding band and the packing, put a mark on the tube by a tape, etc. as the guide
for reassembling the new ones.
[UX-D, B]
Coupling
[UX-E]
Packing
Coupling
Fixixng screws (2 pieces)
Banding band
Packing
Tube (transparent)
Put a mark here
Banding bands (2 locations)
Put a mark here
5-17
Thermistor
Tube (transparent)