Turn On The Power; Password Protection - Hitachi IJ RX2 Service Manual

[Procedure to upgrade function using upgrade key for RX2-S]
1 Turn off the power and install the upgrade-keys on EZJ126 board.

2 Turn on the power.

3 Press Upgrade function setup at the second page of the service maintenance
work screen.
If Prev. menu Next menu is not displayed on the maintenance menu, set the Upgrade
password "UGRS" on the login user selection screen.
For information on changing to the Upgrade mode with Upgrade password
"UGRS", refer to "2.1 Setting of service personnel maintenance mode."
Upgrade screen is displayed.
Upgrade function setup
Max Column
Max Character size
Min Character size
Particle use 1 line
2 line
3 line
4 line
5 line
Chimney/DIN print
2D code print
Max registers
Max printing columns
Calendar items
Shift code, Time count
Replacement items
Count items
Number of upgrades available : ８
Number of upgrades used
4 Select the items to upgrade then press OK.
Upgrade function setup
Max Column
Max Character size
Min Character size
Particle use 1 line
2 line
3 line
4 line
5 line
Chimney/DIN print
2D code print
Max registers
Max printing columns
Calendar items
Shift code, Time count
Replacement items
Count items
Number of upgrades available : ０
Number of upgrades used
5 Exit the maintenance screen then cancel the Upgrade password by using

password protection.

[Stop ]
2 line 3 line 4 line
12x16 18x24 24x32
5x5 5x5 4x5
f/2 f/1
f/2 f/1.5
f/2 f/1.66
f/3 f/2
f/3 f/3
NOT supported supported
NOT supported supported
48 150
120 240
2 8
NOT supported supported
48 99
2 8
Upgrade code
: ０
ＱＳ２０２
[Stop ]
2 line 3 line 4 line
12x16 18x24 24x32
5x5 5x5 4x5
f/2
f/1
f/2 f/1.5
f/2 f/1.66
f/3 f/2
f/3 f/3
NOT supported supported
NOT supported supported
48 150
120
240
2 8
NOT supported supported
48 99
2
8
Upgrade code
: ０
ＨＬ４１８
2-41
Warning Com=0 2015.07.07 12:45
5 line
24x32
4x5
HOME
f/1
f/1
f/1
f/1
f/3
150-2000
1000
Cancel
OK
Warning Com=0 2015.07.07 12:45
5 line
24x32
4x5
HOME
f/1
f/1
f/1
f/1
f/3
150-2000
1000
Cancel
OK