Bosch Sensixx B22L Manual page 14

Problem
The iron does not
produce any
steam.
The ironed
garment turns
dark and/or sticks
to the soleplate.
The soleplate
turns brown.
The appliance
makes a pumping
sound.
Loss of pressure
during ironing.
Water spots
appear on the
garment during
ironing.
Water spots
appear on the
garment during
use of the
"PulseSteam"
function.
The hose gets hot
during use.
Water leakage
from the boiler.
The iron does not
stop steaming
after placing it on
the pad (1).
If the above does not solve the problem, get in touch with an authorised technical service.
14
B O SC H
Possible causes
• The boiler is not switched on or
the water tank is empty.
• The selected temperature is too
high and has damaged the
garment.
• This is a regular consequence of
continued use over a long period
of time.
• Water is being pumped into the
steam tank.
• The sound will not stop.
• Steam release button has been
activated for too long a period of
time, that is, it has been pressed
too frequently.
• May be caused by steam
condensed on the ironing board.
• Water spots are caused by steam
condensation in the hose when
cooling down after use.
• This is normal. It is caused by the
steam passing through the hose
during steam ironing.
• Scale collector (5*) located at the
side of the appliance is loose.
• "PulseSteam" function has been
activated by double click.
Solution
• Set the main power button (12) to
the "I" position (illuminated in red),
and/or fill the water tank.
• Select a suitable temperature for the
material being ironed and clean the
soleplate with a damp cloth.
• Clean the soleplate with a damp
cloth.
• This is normal.
• If the sound will not stop, do not use
the steam generator and contact an
authorised technical service centre.
• Use the steam release button at
intervals. This improves the ironing
result as the textiles will be steamed,
dried and ironed properly.
• Wipe the textile cover of the ironing
board, and iron any water drops to
dry them.
• Water drops stop coming out of the
soleplate after using the
"PulseSteam" function for some
time.
• Place the hose on the opposite side
so that you cannot touch the hose
during ironing.
Tighten up the scale collector.
• Just press the trigger once again
and the iron will stop steaming at
once.