Vertical Steam; Energy Saving "Eco" Button; Auto Shut-Off; Fabric Protection Soleplate Cover - Bosch Sensixx B22L Manual

8

Vertical steam

This can be used to remove creases from
hanging clothes, curtains etc.
Warning!:
E
Never direct the steam jet at garments
that are being worn.
Never aim the steam at people or
animals.
1. Set the temperature to the "•••" setting.
2. Hold the iron in an upright position 10 cm / 4 in
away from the garment being steamed.
3. You can steam iron curtains and hanging
garments (jackets, suits, coats...) by placing
the iron in a vertical position and pressing the
steam release button (15 or 16*).
Energy saving
9
"eco" button
(model dependent)
If the "Energy saving" button (8) is switched on,
you can save up to 25% of the energy and 40%
of the water consumption (*), and still achieve
good results when ironing most of your
garments.
It is advisable to use the normal energy setting
only for thick and very wrinkled fabrics.
(*) In comparison to the maximum setting.
Note: If you work with the "Energy saving"
function, the variable steam regulation and
temperature regulation can still be used as
recommended.
10
B O SC H
10
(Model dependent)
If during ironing, the steam release button
10 cm / 4 in
(15 or 16*) on the iron handle is not pressed for
a certain length of time (8 minutes), the steam
station will automatically switch off.
The "auto shut-off" indicator light (9) will flash
when auto shut-off has been activated.
To switch the steam station back on, press the
steam release button again.
11
(Model dependent)
The fabric-protection soleplate cover (19*) is
used for steam-ironing delicate garments at
maximum temperature without damaging them.
Use of the soleplate cover also does away with
the need for a cloth to prevent shine on dark
materials.
It is advisable to first iron a small section on the
inside of the garment to see if it is suitable.
To attach the soleplate cover to the iron, place
the tip of the iron into the end of the soleplate
cover and pull the elastic strap over the lower
rear of the iron until it fits tightly. To release the
soleplate cover, pull the elastic strap and
remove the iron.
The fabric-protection soleplate cover may be
purchased from our customer service or from
our website
Accessory code

Auto shut-off

Fabric protection
soleplate cover
Name of accessory
(After-sales)
00571510
(online shop)
TDZ2045