Panasonic KX-NCP500 Pc Programming Manual page 788

12.2 [10-2] DIL Table & Port Settings
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
4.9 [2-6-1] Numbering Plan—Main
Feature Manual References
4.1.7 DIL (Direct In Line)
13.1.15 PRIVATE NETWORK FEATURES
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending on the time
of day.
Default
1
Value Range
1–8
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
4.6 [2-4] Week Table
Feature Manual References
4.1.7 DIL (Direct In Line)
17.1.3 Tenant Service
17.1.5 Time Service
VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the DIL destination is the floating extension
number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the caller.
Default
1
788 PC Programming Manual Document Version 2009-12