3feature 1999.9.15 12:44 PM 페이지11
NX-SERIES
HYBRID KEY SYSTEM
EXECUTIVE BARGE-IN (Override)
The feature allows specially-programmed stations to override the automatic
privacy of another station. Programming provides three options: No Barge-in,
With Tone, and Without Tone. When programmed without tone, the barging-in
keyset has its microphone muted. Each station can also be programmed as
secure or not secure. Secure stations cannot be barged-in on. A non-secure
station talking to a secure station cannot be barged-in on. Each station may also
be programmed to enable or disable barge-in.
EXTERNAL MUSIC INTERFACE
The system provides internal music on hold (MOH) in the form of a chime. There is
also an input for an external audio source. An RCA style phono jack is provided on
the Base board for a customer-provided source for music on hold and background
music to keysets. Source selection is made via a Base board jumper.
EXTERNAL PAGE INTERFACE
A 600 ohm voice pair is provided for connection to a customer-provided paging system.
FLASH KEY OPERATION
While on an outside line, pressing the FLASH key will flash the central office or
PBX. This is used to activate custom calling features on C.O. lines or in
conjunction with Centrex/PBX operation. System programming allows
adjustment of flash times for C.O. and PBX lines.
FLEXIBLE NUMBERING
System programming allows each station a programmable two- or three-digit
station number. Re-assignment of these numbers will affect the trunk numbers
and other feature IDs.
FLEXIBLE RINGING
Incoming outside calls can be assigned to ring a station or a station group. The
system provides separate ringing locations for all trunks in both the DAY and the
NIGHT modes.
HOT/WARM LINE
Stations can be programmed to call a pre-defined station, station group, outside
MMC 24 ASSIGN BARGE-IN
MMC 53 TRUNK WIDE TIMERS ⇒
MMC 70 DIAL NUMBERING PLAN
MMC 43 ASSIGN TRUNK RING
NEW CALL: 600 msec
FLASH PBX: 600 msec
3 - 7
FEATURES SECTION