Mmc 71 System Key Programming - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:44 PM 페이지64
NX-SERIES
HYBRID KEY SYSTEM
MMC 71
This MMC allows for the customizing of programmable keys system-wide.
PROCEDURE
1. Press [TRANSFER] and dial 71
2. Using [VOLUME (-) or (+)], select the type of keyset
There are 7 keyset types: NX 24, NX 12, NX 6,
SKP 816, AS 30, AS 12S, NX AOM.
3. Press the desired key
OR
Press [ R E D I A L ] or [ F L A S H ] to select desired key. (e.g. 13)
4. Enter the key programming via keypad.
Trunk number, Trunk Group number, Station number,
Station Group number, or feature number can be
programmed into the keys.
If you want to program a feature key, enter
feature key ID (e.g. NIT : *26). Press [MUTE] or
[MESSAGE] to scroll the feature Programmable key
assignments are listed below. To change another key, return to step 3.
5. Press [TRANSFER] to save and exit.
DEFAULT DATA
NX-24E/NX-24B
19: 207
13: 201
07: 707
01: 701
NX-12E/NX-12B
07: 201
01: 701
NX-6B
01: 701
AS-30
01: 701
07: 707
13: 201
19: 207
25: 213
SYSTEM KEY PROGRAMMING
20: 208 21: 209
14: 202 15: 203
08: 708 09: NONE
02: 702 03: 703
08: 202 09: 203
02: 702 03: 703
02: 702 03: 703
02: 702 03: 703
08: 708 09: 709
14: 202 15: 203
20: 208 21: 209
26: 214 27: 215
PROGRAMMING SECTION
LCD DISPLAY
before ther
22: 210 23: 211
16: 204 17: 205
10: NONE 11: NONE
04: 704 05: 705
10: 204 11: 205
04: 704 05: 705
04: 704 05: 705
04: 704 05: 705
10: 710 11: 711
16: 204 17: 205
22: 210 23: 211
28: 216 29: 217
24: 212
18: 206
12: NONE
06: 706
12: 206
06: 706
06: 706
06: 706
12: 712
18: 206
24: 212
30: 218