Table of Contents
Advertisement
Chapter 2 Front-Panel Menu Operation
To output an FSK waveform
>
7 Move across to the
∨
8 Move down a level and set the
Notice that the
parameter is for the
numbers in the menu, refer to "Menu Example 3" earlier in this chapter.
Enter
9 Save the change and turn off the menu.
The function generator beeps and displays a message to show that the
change is now in effect. You are then exited from the menu.
At this point, the function generator outputs the
You can also use an external signal to shift between the carrier frequency
and hop frequency. For more information, see "Frequency-Shift Keying
(FSK) Modulation" in chapter 3.
46
FSK RATE
9: FSK RATE
annunciator flashes, indicating that the displayed
FSK
mode. For more information on editing
FSK
∧100.0
Hz
ENTERED
command.
"shift" rate to 100 Hz.
FSK
waveform.
FSK
Advertisement
Table of Contents
