Installation Method And Example - LG PSF1032A Service Manual

▣ Installation method and example

1) This model (PSF1032A) is designed to be installed outdoors and supports day to day water proofing.
2) To prevent the product from falling by wind or other external force, use the bolt and nut of M8 or above.
3) Be careful not to let other objects interfere with product from cooling and also be careful not to block the
inlet/outlet when installing the product.
4) Installing the product in an environment that exceeds the usable temperature and humidity can cause
unexpected issues. Therefore always consult with LG Electronics before installing the product.
5) Installing the product in locations where chemicals such as TCE series or chlorine gas are used or
locations where vibration is excessive can cause unexpected issues. Therefore always consult with LG
Electronics before installing the product.
6) When using the product in highly dusty area, the illumination can be reduced due to the dust. Therefore
periodically clean the product and do not install the product where metallic dust is generated.
7) Install at least 1m from the ground clearance distance must be maintained.
8) The mark means min. distance from PLS to lighted object when install the PLS, check the distance from
PLS on the optical axis of PLS.
CAUTION
1. Follow regulations of government agency for technical standard and electric power company's guide
regarding regulations on equipment and wiring.
• By the regulation and this installation guide, electric work using a specific circuit must
be done by certified electric technician. It can cause fire or electric shock if capacity of
WARNING
power supply circuit is insufficient or faulty.
2. Do stated earth work when installing PLS
• Do earthwork of PLS. Do not connect earth wire with gas pipe, water pipe, lightning
rod or telephone line. It can cause electric shock as it makes earthwork incomplete.
WARNING
※ ※ Product size
3m
7
(Units : mm)