Actions - Siemens LOGO! CMR2040 Operating Instructions Manual

5.13.9

Actions

Configure one or more actions that you can later link to events in the "Assignments" tab.
In the upper part of the page, you will see a list with the currently configured actions.
A maximum of 32 actions can be configured.
Add new action / Change action
Add action
In the lower part of the page, click the "Add" button.
An input box and three drop-down lists are then available for the configuration:
Change action
To change an action, follow the steps below.
1. In the list, select the row with the action you want to modify.
2. Change the action with "Change action" in the lower part of the page.
3. Then click "Apply".
Parameter
● Name
Freely selectable symbolic name for this action.
Following this the action name will be used for the assignment configuration.
● Target system
Target system of the action:
– LOGO! CMR
– LOGO! BM
– Send e-mail
– Send SMS
– Send PA-SMS (send SMS of the process image)
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
If you select the CMR, you can use the two outputs of the CMR as the target element
of an action, e.g. opening an output.
If you select the BM as the target system of your action you can change the status of
the BM program or forward the GPS position to the BM.
With this selection you configure the recipient group (see below), the subject, the
message text and possibly an attachment.
With this selection you configure the recipient group (see below) and the message
text.
With this selection you configure the recipient group (see below).
Configuration (WBM)
5.13 Monitoring
117