Printing Reports
To turn the scheduled report capability on or off, press
SchedRep On/Off
in the Patient Data Selection Window. This brings you
to the Scheduled Reports On/Off Task Window. The current setting (On or
Off) is indicated, and a softkey is highlighted (for example, if scheduled
reports are off, the
SchedRep On
key is highlighted). Press the
highlighted key to change the setting.
To cancel a report, press
Cancel Report
in the Selection Window
under
. This cancels only the report that is currently
Trends/Calcs
printing. Any reports that have been waiting will then print.
Refer to "What to Do If Your Report Does Not Print" on page 8-30 for
troubleshooting information.
Trends and Calculations 8-27