Siemens SINUMERIK 810D Commissioning Manual page 51

NagsAway.exe should be started before Setup.exe is called. It requires the NagsAway.ini
configuration file, which is stored in the same directory as NagsAway.exe and contains the
following:
[General]
Interval=100
[1]
WindowCaption=... checking installed MPI version
ControlCaption=&Yes
WinSubCheck=0
CtlSubCheck=0
Valid for:
PCU 50 with PCU Basesoftware WinNT 4.0 upgrade V06.03.06 and
PCU 50 with PCU Basesoftware WinNT 4.0 upgrade V07.03.05
Independent setup
The control parameters in the Setup.ini file of the Setup.exe setup are set for interactive
installation. For "silent" installation, the following settings must be made:
[Startup]
ShowUserDlg = no:
No operator dialog boxes, such as welcome or license dialog boxes, are displayed.
ShowRebootDlg = no:
The end dialog box (Reboot yes/no) is not displayed.
Self-extracting setup
The only way to prevent the end dialog box (Reboot yes/no) appearing is to use the
NagsAway.exe tool to poll it and acknowledge it automatically as soon as it appears.
NagsAway.exe should be started before Setup.exe is called. It requires the NagsAway.ini
configuration file, which is stored in the same directory as NagsAway.exe and contains the
following:
[General]
Interval=100
[1]
WindowCaption=Setup Complete
ControlCaption=Yes, I want to restart my computer now.
WinSubCheck=0
CtlSubCheck=0
[2]
WindowCaption=Setup Complete
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
Installing software and network operation
3.1 Installing software and software update
3-3