Windows Update; Printing; External Dvd Drive; Connection - Bosch DCU 100 Operating Instructions Manual

5.8.3

Windows update

To avoid disturbance when working with the DCU 100,
the automatic Windows updating function is deactivated.
If the DCU 100 is operated with internet access, Win-
dows updating should be performed every 3 months at
the latest to install security updates.
Procedure:
1. Under "Start >> Programs >> Windows Update"
select the button Search for updates.
 Available updates are displayed.
2. Install the desired updates.
5.9

Printing

A printer (e.g. PDR 377) can be connected by way of
the USB interface of the DCU 100.
i
Refer to the printer manufacturer's information for
details of printer drivers and installation.
i
Information on printing can be found in the Online
Help for the Bosch applications.
5.10

External DVD drive

i
The external DVD drive is a CLASS 1 LASER PRODUCT.
5.11

Faults

Problem
The DCU 100 cannot be switched on
and the display remains blank.
The DCU 100 does not react to
any key commands.
After clicking onto the touch screen
with the pen, the mouse pointer does
not appear at the same location.
Operation by way of pen and touch
screen is no longer possible.
Problems when moving the ESI[tronic]
circuit diagrams.
Robert Bosch GmbH
5.10.1
1. Supply the DCU 100 with power by way of the power
2. Use only the USB connecting cable provided to con-
"
i
5.10.2
¶
¶
¶
¶
¶
¶
5.10.3
1. Press the "DVD eject" button on the DVD drive to
2. Carefully insert the DVD with the labeled side facing
i
Note
The capacity of the internal battery is not sufficient to start the DCU 100.
Connect the external power supply unit.
1. Keep the ON button pressed for 10 seconds.
2. Switch on the DCU 100 again.
This switch-off procedure is only to be employed if the DCU 100 will not react to any key
being pressed, as it may result in loss of data on the hard disk if it is implemented during
regular operation. Data created in the course of this diagnostic application may have to be
entered again.
Touch screen calibration must be performed. Connect the mouse or keypad.
In the start bar under "START >> Programs >> HIDeGalaxTouch", call up the menu
"HIDeGalaxTouch", see Sec. 5.8.2
Touch screen calibration must be performed. Connect mouse or keyboard.
In the start bar under "START >> Control panel", call up the menu "HIDeGalaxTouch", see
Sec. 5.8.2
Check the virtual keypad settings. Select the Tools tab and then the menu item "Options".
In the Choose where to show the Input Panel icons and tab field, only the option Show the
icon on the taskbar should be selected.
Operation | DCU 100 | 21

Connection

supply unit.
nect the DVD drive to one of the two USB interfaces
(Fig. 2, Pos. 3) on the DCU 100.
 The driver for the DVD drive is installed automatically.
The DVD drive can be used.
The DVD drive is supplied with power by the
DCU 100 via the USB connecting cable (max. 0.6 m).
Use is not to be made of a power supply unit.

Correct handling of DVD-ROMs

Make sure hands are clean and not greasy when
inserting the DVD-ROM in the DVD drive.
Never touch the unlabeled side of the DVD.
Never write on the DVD or affix labels.
Never use solvents such as spirit or paint thinners, re-
cord cleaners or anti-static agents to clean a soiled DVD.
Carefully wipe off any finger marks or dust with a
soft cloth working outwards from the center.
Never expose DVDs to high temperatures or direct
sunlight.

Inserting/removing DVD-ROM

eject and remove any DVD inserted.
upwards.
Clean the DVD drive at regular intervals with a cleaning
disk for the CD-ROM or DVD drive (see also Sec. 6.1.3).
en
|
1 689 989 174 2015-03-25