Product Description; Intended Use; Scope Of Delivery; Transportation - Bosch DCU 100 Operating Instructions Manual

3.

Product description

3.1

Intended use

DCU 100 is a tablet PC for the workshop area for the
Bosch diagnostic software "ESI[tronic] 2.0" or the
Bosch emission analysis software "BEA-PC".
!
If ESI[tronic] 2.0 and BEA-PC are installed on DCU 100,
then it is always the case that only one of the two pro-
grams can be opened.
This means that ESI[tronic] 2.0 must be closed before
BEA-PC can be started (and vice-versa).
!
The installation of additional software on the
DCU 100 may impair the performance of the DCU 100
system and the DCU 100 may become slower in gen-
eral. In particular this can occur with virus scanner
programs.
!
The DCU 100 must not be exposed to sources of
heat (e.g. direct sunlight), impact, vibration, magnet-
ic fields, and excessive contamination.
i
The installed operating system is
Windows Embedded POSReady 7 (32-bit).
!
You will find the "END-USER LICENSE AGREEMENT
(EULA) FOR MICROSOFT SOFTWARE" (EULA.XPS)
on the Desktop. Please observe the notes contained
herein.
3.2

Scope of delivery

Designation
DCU 100
Battery
External DVD ROM drive with
USB connecting cable (0.6 m)
Case
Power supply unit with
power cord
Touch pen (1x)
Recovery DVD
Original operating instructions
3.3

Transportation

The DCU 100 connecting cables must be detached for
transportation purposes. In addition, the DCU 100 is
only to be transported and stored in the case supplied.
Furthermore, the DVD drive should be stored and trans-
ported in its original packaging in the case.
Robert Bosch GmbH
3.4
The DCU 100 is a portable, mobile tablet PC for work-
shop use. It is operated by means of a pen (for the
LCD touch screen) and a virtual keypad. The data and
measured values can be printed out by way of the USB
interface on an external printer (special accessory). The
DCU 100 and the accessories are supplied in a protec-
tive case.
Fig. 1:
1 LCD with touch screen

2 Interfaces

3 Function key �
4 On/Off button
Order number
– 3.4.1
1 687 335 042
1 687 023 698
1 685 438 649
1 687 023 697
1 684 461 186
–
1 687 005 100
1 689 989 174
Fig. 2:
1 RJ-45 network connection (LAN)
2 Monitor connection
3 USB port (2x), USB 2.0, max. 1 A
4 Memory card slot (SD card)
5 Headphone connection
6 Power supply unit connection (12 V DC)
7 Pen holder
Product description | DCU 100 | 17

Description of device

1 2
DCU 100
Interfaces
1 2 3 4 5 6
7
View of DCU 100 interfaces
1 689 989 174
en
4 3
459953-01_Ko
|
2015-03-25