Nomenclature; Vc-C3 - Canon VC-C3 Instruction Manual

Before You Use the VC-C3

Nomenclature

VC-C3

Camera head LED
Microphone
Wireless
controlle
r sensor
Base LED
Lens
INPUT terminal
CAMERA CABLE
terminal
ID selector
Power switch
*1 When the extension button is pressed, the VC-C3 transmits a signal
to the computer. This means that some software can attach the
camera detection function to the extension button.
10
Extension button*
Used when the VC-C3 is
connected to a computer, etc.
Not used in normal use.
Zoom button
Camera head
Base
Camera
Camera control unit LED
INPUT terminal
OUTPUT terminal
CAMERA terminal
Main power switch
1
Camera Control Unit
RS232C terminal
S VIDEO out terminal
VIDEO out terminal
AUDIO2 out terminal
AUDIO1 out terminal
DIP switches
All normally set to OFF.
Normally set to OFF. If you want
to control the VC-C3 using the
SW1
commands for the earlier VC-C1
model and the commands do not
work when SW3 is set to ON, set
SW2
SW1 to ON also.
Normally set to OFF. Set this
switch to ON if you want to
SW3
control the VC-C3 using the
commands for the earlier VC-C1
model.
SW4 Reserved (always OFF)
If the settings are changed, switch
the VC-C3 OFF and ON again.
These switches should be set when
you connect the VC-C3 to the
computer (consult your authorized
Canon dealer). ( P .35)