Chapter 2 Preparations
1.7
Removing Support Bar
Remove Support Bar when installing or removing the following component:
TPM Kit
DIMM (memory module)
Backup device
Additional 2.5-inch HDD Cage
2.5-inch PCIe SSD installation kit
1. See steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Remove the two screws from Support Bar.
3. Lift Support Bar, and remove it from the server.
Processor (CPU)
Flash backup unit for RAID controller
PCI card
Additional 2.5-inch HDD Cage (Rear)
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
49