Troubleshooting - Philips CAR ENTERTAINMENT SYSTEM CE120 User Manual

10 Troubleshooting

Caution
•
Never remove the casing of this unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this unit,
check the following points before requesting
service. If the problem remains unsolved, go to
the Philips web site (www.Philips.com/support).
When you contact Philips, ensure that your
unit is nearby and the model number and serial
number are available (see 'Get started' on page
10 ) .
No power or no sound.
•
Car engine is not on. Turn the car engine
on.
• Cable is not correctly connected. Check
connections .
• Fuse is burnt. Replace fuse (see 'Replace
fuse' on page 24 ) .
•
Volume is too low. Adjust volume (see
'Adjust volume' on page 20 ) .
• If the above solutions cannot help, press
the RESET button.
Noise in broadcasts.
•
Signals are too weak. Select other stations
with stronger signals.
•
Check the connection of the car antenna.
•
Change broadcast from Stereo to mono
(see 'Select stereo/mono broadcasting' on
page 16 ) .
Preset stations lost.
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Display show ERR-12
• USB/SD/MMC data error. Check the USB
device or SD/MMC card.
ENG
27