Contents 1 Safety 12 Product information 2 Your car audio system 13 Troubleshooting Introduction General What’s in the box About the Bluetooth device Overview of the system 14 Notice 3 Install the car audio system Disposal of your old product Connect wires Trademark notice Mount into the dashboard...
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation.
2 Your car audio What’s in the box system Check and identify the contents of the package: Introduction With this system, you can: • enjoy audio from USB storage devices, SD/ SDHC card, and other external players, and Bluetooth device. •...
Overview of the system t s r q l k j i h d LCD screen • Unlock the front panel. • Connect to a USB storage device. • For .mp3 tracks, press to select the f AUDIO IN previous folder. •...
Page 7
• In radio mode, press to select the preset radio station of No. 6. • In radio mode, press to select the • In radio mode, press and hold to store preset radio station of No. 1. the current radio station at channel •...
3 Install the car • Press to enable or disable the MAX audio system Sound effect. • Press and hold to enable or disable the DBB (dynamic bass boost) sound effect. Caution • Use the controls only as stated in this user manual. •...
Yellow strip To the +12V car Connect wires battery which is energized at all Note times • Make sure that all loose leads are insulated with Connect the antenna and amplifier as electrical tape. • Consult a professional to connect wires as instructed illustrated, if applicable.
Mount into the dashboard • If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. • If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other.
Reconnect the negative terminal of the car battery. Attach the front panel Insert the notch on the front panel to the chassis on the main unit. Press the left end of the front panel inwards until it is securely locked with a “click”.
For the first time use Select a tuner region Press to turn on the system. You can select a radio region that matches your » [PHILIPS] is displayed and the device location. turns to radio mode automatically. Press and hold to access the system menu.
Store radio stations manually Search for a radio station Press , or repeatedly to select a tuner band. Search for a radio station Tune to the radio station that you want to automatically store. Press and hold Press to search for the previous or to store the radio station at the next radio station with strong signals.
6 Play from a Button Function Press repeatedly to select a folder. storage device Pause or resume play. Press to play the previous or next track. Press and hold to rewind a track or search forward fast. /DISP Press repeatedly to display available information about the current track.
7 Use Bluetooth Disconnect a device devices Press and hold MENU to access the system menu. Press repeatedly until [DIS-CON] is displayed. With this car audio system, you can listen to audio from a player or make a call through Press »...
Pick up an incoming call Play audio from a Bluetooth device When the system receives an incoming call, the phone number or [PHONE IN] is displayed. Press to answer the call. If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the Reject an incoming call device through the system.
8 Listen to an 9 Charge your external device USB device You can use the system to amplify the audio You can charge your USB device, for example, input from an external device, for example, smart phone, with this product. MP3 player.
10 Adjust sound 11 Reset the system The following operations are applicable to all supported media. If the system works abnormally, reset the Button Function system to factory default settings. Rotate to increase or decrease the volume level. Press to mute the speakers or release them from mute status.
12 Product Bluetooth information Output Class 2 power Frequency 2.4000 GHz - 2.4835 GHz ISM band Band Note Range 3 meters(free space) Standard Bluetooth 2.0 specification • Product information is subject to change without prior notice. General Power supply 12 V DC (11 V - 16 V), negative ground Fuse 15 A...
If the problem remains The audio quality is poor after connection unsolved, go to the Philips Web page (www. with a Bluetooth-enabled device. philips.com/support). When you contact the •...