Canon VK-16 Setting Manual page 82

Configure Normal Recording
Note
●
Step 3: Set the Night Mode and Resolution (VB-C300, VB-C50i/VB-
C50iR, VB-C50FSi, and VB-C50Fi)
Select a Resolution for recording from the drop-down list. You can select from Low,
2
Medium, High or Not specified.
If you select Not specified, the Storage Server does not attempt to change the
setting, rather it accepts whatever Night Mode setting and resolution the Camera
Server offers.
Note
Tip
●
Step 4: Configure Additional Options
82
● The On motion detection, Backlight compensation, and
additional options are not available, if you use the preset tour
function.
● Preset used for the preset tour are created on the Camera
Server. Please refer to the Camera Server User's Manual for
details on making camera presets.
● Although the VB-C300 does not allow preset tour on the
Camera Server, the preset tour is available via this setting.
● If you select Enabled, the Night Mode status will be changed
to Disabled after the configured recording schedule finishes.
● A higher resolution results in larger disk usage. Make sure
you have enough disk space.
● You can also configure the Night Mode setting if you use a VC-
C50i/VC-C50iR connected to a VB150.
● The Top page of the Camera Server is displayed after Internet
Explorer launches. Please refer to the Camera Server User's
Manual for details. You can edit an existing Camera Server's
settings.
Select the Night Mode from the
1
drop-down menu. You can select
from Not Specified, Disabled,
Enabled, and Auto (for VB-C300
only).
To use the exposure, white balance,
and/or focus settings on the Camera
Control Panel, tick the corresponding
check box.